Rigid TQ Case Hardware Set: Replacing Worn Mounting Parts

When to replace rigid TQ case hardware

A rigid tourniquet case only stays secure if its fasteners do. If you notice a mounting screw backing out, a stripped thread, or hardware that no longer holds the case firmly, replacing the affected parts is a practical fix. The Rigid TQ Case Replacement Hardware Set with Vibra-Tite gives you the components to restore function without replacing the entire case.

This set is compatible with NARescue rigid TQ cases. It includes replacement hardware components and Vibra-Tite, a thread-locking compound that helps keep fasteners secure. Use it for routine maintenance or field repairs when original hardware is worn or lost.

What the replacement hardware set includes

• Rigid TQ Case Replacement Hardware Set with Vibra-Tite: Includes replacement hardware components for rigid tourniquet cases and comes with Vibra-Tite thread-locking compound. You get the fasteners and a threadlocker in one set, so you can address loose or missing hardware in a single step.

  

• Rigid TQ Case Replacement Hardware Set with Vibra-Tite: Compatible with NARescue rigid TQ cases. Confirms the set is intended for NARescue rigid cases, so you can check your case model before ordering.

How to replace worn hardware on your rigid TQ case

Follow these steps when a fastener is loose, damaged, or missing. Work in a clean, well-lit area so small parts are easy to track.

1. Inspect the case and identify the problem: Check each mounting point for loose screws, stripped threads, or missing hardware. Note which fasteners need replacement.
2. Remove the worn hardware: Take out only the screws or components that are damaged or loose. Keep the rest of the case assembled to avoid misplacing parts.
3. Apply Vibra-Tite to the new fastener: The set includes Vibra-Tite thread-locking compound. Apply it to the threads of the replacement screw as directed on the product packaging to help keep it secure.
4. Install the replacement hardware: Thread the new screw into the mounting point and tighten it firmly. Avoid over-tightening, which can damage the case or strip threads.
5. Check the fit and function: Make sure the case holds your tourniquet securely and that all mounting points are tight. Re-check after a short period of use.

Why Vibra-Tite matters for tourniquet case mounting screws

Vibration and repeated handling can work screws loose over time. Vibra-Tite is a thread-locking compound designed to help keep fasteners from backing out. Using it on replacement screws adds a layer of security, especially on cases that see frequent movement or field use.

The set includes Vibra-Tite, so you do not need to source a threadlocker separately. Follow the application instructions on the product label for best results.

What to check before you order

Confirm that your rigid tourniquet case is an NARescue model, since this set is listed as compatible with NARescue rigid TQ cases. If you are unsure of your case model, check the markings or original packaging before purchasing.

The set is available in a Standard variant. If you need hardware for a different case brand or model, this set may not be the right fit. When in doubt, contact the manufacturer for compatibility guidance.

Product details at a glance

• Rigid TQ Case Replacement Hardware Set with Vibra-Tite: Rigid TQ Case Replacement Hardware Set with Vibra-Tite, catalog price USD 1.97 (comparison price USD 2.99). An affordable way to extend the life of your rigid case instead of replacing it.