WX Saber Ballistic Glasses: PTX Lens Care

Quick answer

Clean the PTX laser lens insert with a microfiber cloth and approved lens spray, store it in the included case, and avoid abrasive materials or solvents that can damage the coating.

Step-by-step PTX lens care

1. Rinse with lukewarm water: Hold the PTX lens insert under a gentle stream of lukewarm water to remove loose dust and debris. Do not rub the lens dry before rinsing, as particles can scratch the coating. Never use hot water, as it may warp the lens or damage the coating.
2. Apply lens cleaner: Spray a small amount of optical-grade lens cleaner onto both sides of the insert. Avoid ammonia-based or abrasive cleaners. Gently wipe with a clean microfiber cloth in a circular motion. If no lens cleaner is available, use a drop of mild dish soap mixed with water, then rinse thoroughly.
3. Dry with a fresh microfiber cloth: Use a dry, lint-free microfiber cloth to buff the lens until clear. Check for streaks or smudges and repeat if needed. Do not use the same cloth for multiple lenses without washing it first. Wash microfiber cloths separately with mild detergent and air-dry to avoid contamination.
4. Store in the protective case: Place the PTX lens insert back into the WX Saber frame or store it in the provided hard case. Avoid leaving the glasses in direct sunlight, a hot vehicle, or near abrasive surfaces. Always store the insert lens-side up or in a dedicated slot to prevent scratches.

Product facts

• WX Saber Advanced Ballistic Glasses with PTX Laser Lens Insert (UV/Blue/Green): The WX Saber Advanced Ballistic Glasses include a PTX Laser Lens Insert for UV, blue, and green light protection. Proper care of this specialized insert is essential to maintain its multi-spectrum protection and prevent premature wear.